|
| From A Customer |
"We have been working with
Performance Electronics to upgrade from our old Haltech to their ECU. There is no
need for ignition modules and we can use the stock crank pickup sensor with a new wheel
instead of the magnets on the cam that our old Haltech required. If you are looking for a
new ECU, these guys are good."
--Bradley University |
|
| From A Customer |
"We switched from Haltech
to Performance Electronics.
Very inexpensive, easy to learn, and easy to operate. Brian Lewis from Performance
Electronics is always willing to help, even if it is on
somebody else's system."
--Sam Zimmerman, Idaho |
|
|
|
Home »
Downloads |

|
|
|
|
|
|
Coltec Direct Injection Control System
|

|
Performance
Electronics, Ltd. was commissioned by Coltec, Inc. in conjunction with Cummins Engine
Company and the U.S. Navy, to develop a custom engine control system for a revolutionary
experimental engine. The rotary power plants novel combustion concept required
custom software and hardware to control fuel delivery and spark ignition. Performance
Electronics delivered the controller hardware and software plus engine hardware, system
calibration and firmware update tools. |
COMPLETE ADJUSTABILITY All system
parameters adjust using a PC-based, custom monitoring program.
FUEL CONTROL The Electronic Control Unit
(ECU), via direct injection, controls fueling based on various engine parameters and
sophisticated analysis.
IGNITION CONTROL The ECU adjusts and
controls ignition timing and dwell.
ADDITIONAL CONTROL Another unique feature
of this system is the ability to drive by wire. The ECU electronically
controls the throttle valve allowing its closed-loop operation as a function of other
engine parameters. The fuel pump and several status indicators are similarly controlled by
the ECU.
TOTAL PACKAGE SOLUTION Performance
Electronics, Ltd. supplied the Total Engine Control Solution, which included the
electronic control unit, wire harness, throttle body, air filter, ignition coil, relay
box, programming tools and complete system manual.
|
| |
Hand-Held Programmer
|
|
The hand held
programmer was developed as a compact replacement for a laptop computer. All of the engine
parameters could be modified and viewed using this compact device.
The hand held programmer shown to the left provided a
robust and easy to use tuning solution for our customer. |
| |
Single Cylinder Engine Controller
|

This is the single-cylinder engine control system. All of the
electronics are sealed within the water-tight enclosure.
|
This system was
designed for a two stroke motorcycle engine. The ECU is small, lightweight, rugged and it
controls all of the fueling and ignition responsibilities of the engine. This system had
many of the same features as some of our standard engine control products. The benefits of
adding an engine management system to a 2-stroke include:
Increased low and mid RPM torque due to better fuel and ignition
control
Improved all around drive-ability
Reduced exhaust emissions
|
|