History file for Ecu_Monitor 2.1.13 (2/2/03) --- fixed bug where screen stops updating. related to editdata flag being set and not cleared ------------------------------------------------------------------ 2.1.14 (3/3/03) --- added second plot on realtimeplot, print, logdata, etc --- added time to the standard log file --- changed data display to include volts for "off" user analog channels --- added version numbers to ini file ------------------------------------------------------------------ 2.1.15 (3/10/03) --- added 3d fuel and ign plots to fuel/ign table edit --- changed ini version number to 1.2 ------------------------------------------------------------------ 2.1.16 --- Not released ------------------------------------------------------------------ 2.1.17 (4/8/03) --- Not released ------------------------------------------------------------------ 2.1.18 (4/10/03) --- added crosshairs triangles to fuel/ign ------------------------------------------------------------------ 2.1.19 (4/13/03) --- redid crosshairs to use PictureBox that is local to the form, not a mdi form. Much faster. --- reworked 3d-plot to fix spped problem, Had called DrawSurface should have called DrawCurrentState (3x faster) --- commented out crosshair triangles. --- removed (0-5v) load option --- reset code to use 2.008 - 2.010 ------------------------------------------------------------------ 2.1.20 (4/20/03) --- Not released ------------------------------------------------------------------ 2.1.21 (4/24/03) --- fixed run time error with 3dIgn and Smooth, called invalid routine. ------------------------------------------------------------------ 2.1.27 (6/14/03) --- enabled 6cyl wasted spark with version 2.012 and above --- moved limit for ecu 2.008 - 2.019 --- added fire coil #3 to diagnostics ------------------------------------------------------------------ 2.1.28 (6/15/03) --- Added staged injector switch --- removed kill engine from digital input ------------------------------------------------------------------ 2.1.29 (6/19/03) --- Enabled staged with Ecu version 2.014 or higher --- Enabled O2 with Ecu version 2.014 or higher ------------------------------------------------------------------ 2.1.30 (6/22/03) --- Added 3-bar map --- Remove highlight of % cylinder ------------------------------------------------------------------ 2.1.31 (7/16/03) --- correct 3-bar map cal --- added com 3,4,5 for USB --- discovered/fixed save com number error. ------------------------------------------------------------------ 2.1.32 (8/29/03) --- changed default, offline does not use O2, Staged or Coil 3 --- rebuilt install files ------------------------------------------------------------------ 2.1.33 (9/03/03) --- changed defaults loaded when offline --- changed the default fuel table equation --- fixed 3Dplot updates for default fuel/ign tables ------------------------------------------------------------------ 2.1.34 (9/19/03) --- added 2 or 4 cyl option and changed default fuel table, to use displacement per cylinder ------------------------------------------------------------------ 2.1.35 --- New release for production ------------------------------------------------------------------ 2.1.36 (11-01-03) --- Update of 3D plots on load of data file --- Fastload switch was being overwritten --- changed Bootload mode found to Invalid ECU response. --- fixed Comm port (3,4,5) problem ------------------------------------------------------------------ 2.1.37 (12-04-03) --- added WheelType --- changed warnings/errors again --- enabled for versions 2.100 - 2.120 ------------------------------------------------------------------ 2.1.38 (12-20-03) --- found/fixed Comm port (3,4,5) problem ------------------------------------------------------------------ 2.1.39 (01-09-04) --- Disabled Staged --- Disabled EGO --- Disabled 12-3 --- Disabled Wasted Spark (6) --- enabled for versions 2.008 - 2.010 --- 12-3 comm based on switch ------------------------------------------------------------------ 2.1.40 (01-20-04 .. 03-05-04) --- Added filename and path the print out --- Max Rpm to 15000 --- added experimental firmware version support 255.### --- fixed Runtime Error 13 - conversion of ###.### with Csng() instead of Val(), (Locale support error i.e ###,### for Canada/French) Still problems with ###,### suggest use english. --- On Invalid Command, Send CLEAR_ERRORS to ECU and take offline need to clear INVALID_COMMAND in comm.c --- enabled for versions 2.008 - 2.011 ------------------------------------------------------------------ 2.1.41 (03-12-04) --- Invalid command for 2.008 - 2.010, says power down ECU --- added TEST button for SuperUser. Send Invalid Command to ECU ------------------------------------------------------------------ 2.1.42 (04-24-04) --- Set the minimum open time to 0.25 (4bits) --- added F5,F6,F7,F8,F9 (Add,Sub,Mult,Div) hot keys for Fuel,Ign Tables --- hot key for diagnostics ^D --- Changed Invalid ECU response, check your cables Invalid Repsonse, check your com port/cables ------------------------------------------------------------------ 2.1.43 (05-24-04) --- Fixed typo Copensation to Compensation --- first pass at the LOCALE changes 1.234 and 1,234 use CDbl instead of Val and check for IsNumeric() --- added more shortcuts ------------------------------------------------------------------ 2.1.44 (09-19-04) --- reduced rev limit upper limit to 18000 --- changed data logging, asks for file each time --- added status_system to logfile - dec bit Meaning - 1 1 power - 2 2 running/cranking - 4 3 fuel pump - 8 4 Invalid Pulse - 16 5 Invalid Command - 32 6 Memmory error - 64 7 stack overflow - 128 8 empty called --- Fixed update of 3D tables for Find ECU (kill power,timeout, reconnect did not update) --- Water Temp color change based on values >210 yellow, >230 red ------------------------------------------------------------------ 2.050 Build 001 - (09-24-04) --- New version number/control ------------------------------------------------------------------ 2.050 Build 002 - (09-30-04) --- increase accel compensation 2x --- removed injector open angle ------------------------------------------------------------------ 2.050 Build 003 - (10-12-04) --- Fixed data logging problem. RealTime not reset when window closed without first pressing STOP ------------------------------------------------------------------ 2.050 Build 004 - (10-12-04) --- Added new cranking compensation parameters ------------------------------------------------------------------ 2.050 Build 006 - (12-31-04) --- grayed out accel/decel if no TPS --- grayed out mode of starting comp if no coolant sensor --- turned off air temp comp array if no air temp sensor --- turned off water temp comp array if no water temp sensor --- made max rpm 16500 for rev limit, all other rpm based in engine.maxrpm ------------------------------------------------------------------ 2.051 Build 000 - (01-04-05) --- removed UC_extra4,UC_extra5,UI_extra4,UI_extra5 --- removed open_injector angle --- added map min/max --- modified print/file load and save. --- added (-Test, -- set invalid ISR) ------------------------------------------------------------------ 2.051 Build 001 - (01-07-05) --- added automatic adjustment for fuel/ign based on map max/min change --- fixed water temp comp array if no water temp sensor --- returned focus to Fuel/Ign grid after a save ecu ------------------------------------------------------------------ 2.051 Build 002 - (01-11-05) --- Display 0 open time and 0 deg ign for "cut" ------------------------------------------------------------------ 2.051 Build 003 - (01-20-05) --- added starting prime pulse, cranking delta rpm --- changed the method for locating the red block on fuel/ign ------------------------------------------------------------------ 2.051 Build 004 - (01-23-05) --- fixed tps call problem --- check for bad data (map max/min bits) ------------------------------------------------------------------ Skipped (build 005 - 009) ------------------------------------------------------------------ 2.051 Build 010 - (01-25-05) --- Changed copyright date --- Changed the method the tps_percent is computed. --- fixed red block update problem caused by slow tps/map change --- swapped color of of Blue/Green Blob --- changed color of staged table to yellow --- removed the option to rescale fuel/igniton table cells ------------------------------------------------------------------ 2.051 Build 012 - (01-30-05) --- Fixed Map Max/Min not being sent to ECU on file upload ------------------------------------------------------------------ 2.051 Build 013 (02-04-05) --- Fixed file load to work with Version 1.07 (Monitor 2.1.35) and 1.08 (Monitor 2.1.43) ------------------------------------------------------------------ 2.051 Build 014 (02-13-05) --- Fixed update of Max and Min Map with Map type change --- New message for re-scale of Map max/min ------------------------------------------------------------------ 2.051 Build 015 (02-15-05) --- Fixed comm error problem if no ini file found --- Added automatic clear of memory error ------------------------------------------------------------------ 2.051 Build 017 (?) --- Smart Add/Subtract ------------------------------------------------------------------ 2.051 Build 018 (03-29-05) --- Removed Smart Add/Subtract